Tera HW0007 Barcode Scanner

Hardware Guide

The Tera HW0007 is a wireless gun-style barcode scanner. It is stored in its charging cradle and can be removed to scan barcodes upon trigger pull.

Note

Check out the Tera 9000 instead. It is the recommended scanner for most applications as it is hands-free and requires no trigger pull.

Configuration QR Codes

Scan each of the following QR codes using the barcode scanner. These configure the scanner to work with the rest of the system.

Careful

The scanner has a wide field of view and could accidentally scan a different code. Try covering the other codes with your hand, or zooming so only one is visible.

1. Reset to factory default
2. Set volume to low
3. Disable sleep
4. Initialize add prefix sequence
5. Add “1” to prefix code
6. Add “1” to prefix code (again)
7. Add “2” to prefix code
8. Add “6” to prefix code
9. Save prefix sequence
10. Enable prefix